EAPL

Model E3PT-MU (Ver. 2) [Shortly Introducing]

Features:

•   1.Din sized enclosure for panel mounting.
•   2.Digital dual display for set value and process value.
•   3.Program - enable & disable facility for parameters programmed except time duration
•   4.Restart / Hold facility during power failure conditions.
•   5.Function: On Delay / Interval / Cyclic Adjustable.
•   6.Selectable start signal facility : No start, pulse or continuous
•   7.Selectable relay change over  : 1 instant & 2 Delayed or 3 Delayed
•   8.Front and back reset cum start signal facility.
  •   9.Over Voltage protection
• This model will be able to replace our earlier models E3PT and E1DT

Size Overall  :  96 x 96 x 112 mm   

Cut-out          :  92 x 92 mm         

Model PVIMD-G

Function:  Monitors phase sequence, phase failure, phase unbalance, over voltage,
under voltage, over current & under current  in a 3 phase 4 wire system & trips
during unhealthy condition

Features:

•   1. 3 phase 4 wire system & trips during unhealthy condition
•   2. Din sized enclosure with digital display for Setting and       process value
•   3. Displays all 3 phase Voltages in scrolling fashion during       healthy state 
•   4. Displays all 3 phase Currents in scrolling fashion during       healthy state 
•   5. Displays nature of fault immediately whenever unhealthy       state occurs but trips only after set delay time for that       parameter is over.
•   6. Program enable/disable facility available
•   7. Manual/Auto reset feature available
•   8. Terminals provided for external CT connection,       programmable up to 500 CT-Primary and CT-Secondary      (Factory set – 5).
•   9. Nominal Voltage and Nominal Current settable
  • 10. In-rush time settable.
  • 11. Trip Delay time can be selected individually for each       parameter.
  • 12. Unwanted parameters can be bypassed.
  • 13. Relay logic settable for NO/NC conditions
  • 14. Mounting: Din rail / Screw Mounting

  Dimensions:  76 x 78 x 115mm (W x H x D)