Features

  • Din sized enclosure for Track / Screw mounting.
  • Front terminal protective cover for safety.
  • LED indication for timing in progress.
  • Time delay selectable in 4 ranges.(except A1DN-X (CSA).
  • A1DA: external potential free command contact for timing initiation.
  • A1DS: Transfer time delay of 40 msecs / 100 mSecs user selectable.
  • A1DN-X (CSA): 20msecs. Factory set delay.
  • Dimensions: 22.5 X 75 X 102mm (W X H X D).

Product Ranges

Electronic Timers

                           A-Series

                           B-Series

                           Digital Timers

                           H-Series

                           S-Series

Monitoring Devices

Power Supplies

Annunciators

Energy Management System

Tachometers

Time Switch

Hour Meters

Counters

Unik Temp
                          TX7 Series

                           H3TX Series

                           EX-9 Series

J4TX-Temperature Controller

New Products

_______________________________

A Series


Model
Function
Source Voltage
Time Range
Specifications
A1D1(CSA)
ON delay Timer
240V AC
0.3 secs to 30 mins
Click Here
A1D1-X(CSA)
ON delay Timer
 X-Version
0.3 secs to 30 mins
Click Here
A1D1-X(60M)
ON delay Timer
X-Version
0.6 secs to 60 mins
Click Here
A1DE-X
Interval timer
X-Version
0.3 secs to 30 mins
Click Here
A1DN-X(CSA)
Auxilary Relay timer
    X-Version
 20 m secs
Click Here
A1DCS-X
Cyclic timer Equal
ON-OFF
 X-Version
 0.6 secs to 60 mins
Click Here
A1D1(9-30V)
ON delay timer
9V - 30V DC
0.3 secs to 30 mins
Click Here
A1DA
Signal OFF delay timer
110V/240V AC
0.3 secs to 30 mins
Click Here
A1DS
Star delta timer
240V AC
0.6 secs to 60 secs
Click Here
A1D1(SR)
ON delay timer with single range
12V DC
18 secs to 180 secs
Click Here
A1D1(WB)
ON delay timer with wide band
266-456V AC
 3 secs to 30 secs
Click Here
A1DH-1
Power OFF delay timer
 240V AC
18 secs to 180 secs
Click Here
**X-Version:24VAC/DC to 240VAC/220VDC
Design & Specifications are subject to change without notice.
Our Recommendation on Relay Operation is One LAKH. However, if the operations crossed two LAKH We recommend replacing the unit to avoid inadvarent stoppage.
User is recommended to confirm the suitability of EAPL product range for intended application.
EAPL is not responsible for consequential damage arising out of use of its products.
Note : If you do not get the required model with any dealer for what so ever reason,kindly
Contact Us immediately for  helping you out.