EAPL
Features
- State of Art Microcontroller Design.
- Enclosure suitable for screw mounting(except ST4-M1).
- 7 segment display indication for channel and timing operation
(except ST-4M1). - User friendly programming for ON/OFF time selection independently
(except ST-4M1). - Hold /Restart failure available during power failure(except ST4M1)
- Over voltage protection(except ST-4M1).
- All models are available with IP66 enclosure.
Product Ranges
Electronic Timers
A-Series
B-Series
Digital Timers
H-Series
S-Series
Monitoring Devices
Power Supplies
Annunciators
Energy Management System
Tachometers
Time Switch
Hour Meters
Counters
Unik Temp
TX7 Series
H3TX Series
EX-9 Series
____________________________
 |
S Series
| Features | |||
| ST 10M1/ST6M1/ST 10-M2 | ST4-M1 | ||
 |
Pause facility provided. | |
Analog Sequential Timer |
|
External contact for timing initiation (pulse signal). | |
Enclosure suitable for din rail mounting |
|
Terminals provided to Program single/multiple cycle. | |
ON/OFF time is common for all relays. |
|
Multiple Sequential timer can be cascaded to obtain more channel. | |
Dimension: 110 x 86 x 68mm (L X W X D) |
|
Copying of 1st relays ON/OFF time to all relays possible. | ||
|
Dimension:200x130x45mm. | ||
| Combination Timer : S1DC8-M3 | |||
| ST15-M2 | |
Timer can be Programmed for single/ multiple cycles. | |
|
Continous start signal needed to run timer | |
Pause facility provided. |
|
Copying of 1st relay's ON/OFF time to all relays possible. | |
Erasing of programs by reset terminal . |
|
Continous differential pressure signal needed to run timer. | |
Combination timer 8 relays x 8 combinations =64 programs. |
|
Dimensions 200 x 130 x 45mm [W x H x D] |
|
Dimension 200x130x45 mm. |