Product Ranges

Electronic Timers

                           A-Series

                           B-Series

                           Digital Timers

                           H-Series

                           S-Series

Monitoring Devices


Power Supplies


Annunciators

Energy Management System

Tachometers

Time Switch


Hour Meters

Counters

Unik Temp
                          TX7 Series

                           H3TX Series

                           EX-9 Series

J4TX-Temperature Controller

New Products

_______________________

A Series


Model :A1D1(CSA)
Function
Function ON delay Timer
Voltage
Rated supply Voltage 240V AC
Operating Voltage Range -20% to +10% of the rated voltage.
Allowable Ripple (Not Applicable)
Time Range
Time Range 0.3 Sec to 30Min
Range Selection 3 Sec,30 Sec,3Min,30Min
Variation due to temp.change ±5%max. ±100mSec
Variation due to voltage change ±2%max ±100mSec
Variation due to frequency change ±2%max. ±100mSec
Setting Accuracy ±10%max. w.r.t full scale ±100mSec
Repeat Accuracy ±1% max. ±100mSec
Recovery Time 100mSec minimum
Start Signal (Not Applicable).
Temp. Coefficient (Not Applicable).
Min. enerzisation time (Not Applicable).
Relay Output
Control Output 5A @ 250VAC
No. of relays/Change over (Not Applicable).
Mechanical life (Not Applicable).
Electrical Life 105 operations minimum(under full load)
Rated Frequency of operation 1800 ±5% operations per hour max
Electrical
Dielectric Strength 01)1.5KV AC(rms),50Hz for 1 Minute.(between INPUT terminals & enclosure)
02)1.5KV AC(rms),50Hz for 1 Minute.(between relay contact terminals & enclosure)
03)1.5KV AC(rms),50Hz for 1 Minute.(between Input terminals & Relay contact terminals)
04)2.0KV AC(rms),50Hz for 10-30 Sec.(between non continuous contacts of relay)
Power Consumption AC approx. 10VA/2W
Insulation Resistance >100M ohms @ 500 V DC
Frequency (Not Applicable).

Control Relay output

-Rated making current

 

-Max breaking current

 

-Min making & breaking current

5A @ 250VAC
5A @ 28VDC resistive load

5A @ 250VAC
5A @ 28VDC resistive load

100mA @ 5VDC

Radiated Emission & Conducted Emission

Degree of pollution and over voltage category

Disengaging value of i/p voltage

Degree of protection

As per EN55011 Class A Group 1

 

3KV / 2

20 V

Terminal block - IP20
Front face - IP50

Immunity to electro static discharge according to IEC61000-4-2 Level 4(AIR 15KV / CONTACT 8KV)
Immunity against high Frequency electro magnetic fields according to IEC61000-4-3 Level 3(10V / m)
Immunity against fast transients according to IEC61000-4-4 Level 2(Direct 1KV Symmetric coupling)
Immunity against surges according to IEC61000-4-5 Level 3(2KV Symmetric coupling)
Physical
Dimensions 22.5 X 75 X 102mm (W X H X D)
Enclosure(series) A1D series
Ambient temperature Operation:-10 to +55° C
Storage: -25 to +80° C
Humidity Max 85% RH @40° C
Connections Screw type terminals with self lifting clamps
Mounting Symmetrical 35mm DINrail EN50022
Approvals --
ISSUE DATE:15/07/2010