Electronic Timers
A-Series
B-Series
Digital Timers
H-Series
S-Series
Monitoring Devices
Power Supplies
Annunciators
Energy Management System
Tachometers
Time Switch
Hour Meters
Counters
Unik Temp
TX7 Series
H3TX Series
EX-9 Series
_______________________
Model :ST-10M2 |
|
| Function | Sequential timer with 10 channels |
| Rated supply voltage | 85V TO 270V AC/DC |
| Rated Frequency | 50/60 Hz ± 5% |
| Power Consumption | AC approx. 15V A /3W |
| Control Output | 10(OP0 to OP9)TRIAC OUTPUT, 500mA @ 250V AC resistive |
| Start Signal (S1,S2) | Potential free closure for a minimum of 150 mSec. |
| Conduction Time (O1,O2) | >150 mSec |
| On time range | 0.01 Sec to 99Hrs 59Min for each channel |
| Off time range | 0.01 Sec to 99Hrs 59Min for each channel |
| Setting Accuracy | ± 0.2% max w.r.t setting ± 20msec |
| Repeat Accuracy | ± 0.3% max ± 20msec. |
| Recovery Time | 2 Sec minimum |
| Rated Frequency of operation | 1800 ± 5% operations per hour max |
| Variation due to voltage change | ±1% max. ± 50mSec. |
| Variation due to temperature change | ±2% max. ± 50mSec. |
| Variation due to frequency change | ±1% max. ± 50mSec. |
| Ambient temperature | Operating: -10° C to + 55° C Storage : -25° C to + 80° C |
| Humidity | Max. 85% RH @ 40° C |
| Electrical Life(under full load) | 105 operations minimum |
| Electrical Connection | Screw type terminals with self lifting clamps |
| Dimension | 200 x 130 x 45 mm [W x H x D] |
| Insulation Resistance | >100M ohm @ 500V DC |
| Enclosure (series) | S1D series |